Home
Product Catalog
Trade Leads
Camera
FMTransmitter&BluetoothHeadset
products accessory
Q&A  and EBAY Dropship service
Contact Us
EnglishChinese SimplifiedChinese Traditional
FMTransmitter&BluetoothHeadset

FM   Transmitter

 

Model: GDC-099

Features:
1) Built-in FM transmitter
2) Read MP3 file from the USB flash disk directly and broadcast through the car FM
tuner
3) Line-in function that enables you to enjoy music from the external audio device,
such as CD, and MD players
4) Four functional keys: play / pause, prev / v-, next / v+, and CH
5) Adjust channels within 87.7 - 88.9MHz
6) Car cigar socket power supply (12V DC power)
7) USB1.1 interface with high transfer speed
8) 7 green LEDs that indicate 7 preset channels
9) 1 red LED which indicates work state (play or pause)

spec

GDC--098
1,Insert two pieces of 1.5V AAA size batteries in the battery compartment.The LCD
display will   show the time.
2.Press ON/OFF button once enter transmit mode,LCD will show the current transmit
frequency,  press or   button to increase or decrease adjust frequency.Press ON/0FF
button once again   to stop transmit andthe real time will show on LCD display.
3.When you want store current frequency,press M1,M2 or M3 button for  about 3 seconds
for  the store location for you to select frequency easily.When you want to
use the store frequency,  Press M1,M2 or M3 button once.The memory number will
show on display.
4.When the unit show the time,press and hold SET button for about 3 seconds enter
setting mode, the last number of minute will flash,press or button to set your
desired digit,press SET button to confirm andenter to set the first first digit
of minute,using the same operation to set the digit of minute and hour.The LCD
5.When in the transmit state ,press SET button will show the time for about 3 seconds.
6.Low batterv detect function
7.Temperature display.
Specitications:
Frequency response:20Hz-20KHz      Power source:2AAA
batteriesSeparation: 50dB                  or the car's power sourceOperating current:38mA
             Transmit distance 5m Operating volt:1.5~3V             
Distortion 3%Transmission range:                 (F=75KHz.f=1KHz)87.5-108MHz(interval
0.1MHz)       Signal to noise ratio 45dbTemperature:1000¡À1              DC
power:5V¡À0.5

Model: GDC-097

 

1) Frequency response:20Hz - 20kHz
2) Separation: >= 50dB
3) Operating current:50mA
4) Stand-by current:90uA
5) Transmission range:106.7~107.9MHz (interval 0.1MHz)
6) Power source:2 AAA batteries or the car's power source
7) Connecting cord length:190mm
8) Dimensions (D x W x H):84 x 48 x 22mm
9) Weight:63g (batteries excluded)
10) Accessory:1 car charger

Features:
1) High fidelity stereo:This device can modulate the audio frequency signal of CD,
MD, MP3, MP4, PDA, Notebook, and PC to FM signal (106.7~107.9MHz ); With the stereo
tune you can enjoy listening high quality music anywhere
2) Digital PLL: With digital PLL, wave signal transmission and reception will not
be affected even in places subject to extreme change in temperature; in addition,
using the digital tune can avoid the fussy frequency modulation
3) Powered by batteries or the car's power source
4) Full frequency range design can effectively avoid interruption
Operation instruction:
1) Install the batteries (2 AAA batteries) or connect to the car's power source
2) Plug the FM Transmitter into the audio device's output port
3) Adjust the volume and frequency of the FM radio (avoid the transmission points
of the broadcasting stations)
4) Press the power button of the FM transmitter, tune the transmission frequency
according to the reception frequency of the FM radio (if the FM signal is interrupted,
please set the frequency of the FM transmitter and the FM tuner to the other
frequency)
5) Press M1/M2/M3/M4 button for a few seconds until M1/M2/M3/M4 is shown on the LCD,
so that you can save the transmission frequency (make sure the batteries have
power)
6) The FM transmitter will automatically shut down after 2 minutes if no audio frequency
is input



Powered by DIYTrade.com